">
 
                | Arayüz | Programlanabilir SSI+Incremental | 
| Single Turn | Programlanabilir Max 16 bit | 
| Multi Turn | Programlanabilir Max 16 bit | 
| Pulse Aralığı | 1- 16348 Ppr | 
| Çalışma Gerilimi | 4.75-30V DC | 
| Flange Gövde Tipi | Clamp | 
| Flange Gövde Çapı | 58 mm | 
| Şaft Çapı | 10 mm | 
| Koruma Sınıfı | IP66/IP67 | 
| Şaft Koruma Sınıfı | IP65 | 
| Konnektör Tipi | M23, Radial, Erkek, 12 pin | 

| Interface | |
| Interface | Programmable SSI + Incremental RS422 | 
| Optional Incremental Pulses | Programmable Pulses up to 16384, Default = 1024 | 
| Manual Functions | Preset + complement via cable or connector | 
| Interface Cycle Time | ≥ 25 µs | 
| SSI Format | MMMMMMMMMMMMSSSSSSSSSSSSS0 | 
| Configuration Tool | UBIFAST Configuration Tool (Version ≥ 1.6.7) | 
| Video Manual |  Watch a simple installation video | 
| Programming Functions | Absolute: Resolution, Revolution, Code Incremental: Pulses per Revolution, Counting Direction | 


| Outputs | |
| Output Driver | SSI (RS422) / Incr. (RS422) | 
| Output Incremental | A, B, Z | 
| Quadrature Phasing | 90° ± 4.5° electrical (Speed > 400RPM) | 
| Output Voltage High Level Push-Pull (HTL) | > 4 V @ 4,75-9 V Supply Voltage; > V-3 V @ 9-30 V Supply | 
| Output Voltage High Level RS422 (TTL) | > 4 V | 
| Output Voltage Low Level RS422 (TTL) | < 0.5 V | 
| Electrical Data | |
| Supply Voltage | 4.75 – 30 VDC | 
| Current Consumption | Typical [email protected] (no load) | 
| Power Consumption | ≤ 1.0 W | 
| Start-Up Time | < 1 s | 
| Clock Input | RS 422, via Optocoupler | 
| Clock Frequency | 100 kHz – 2 MHz | 
| Reverse Polarity Protection | Yes | 
| Short Circuit Protection | Yes | 
| EMC: Emitted Interference | DIN EN 61000-6-4 | 
| EMC: Noise Immunity | DIN EN 61000-6-2 | 
| MTTF | 350 years @ 40 °C | 
| Sensor | |
| Technology | Magnetic | 
| Resolution Singleturn | Programmable max. 16 bit, pre-programmed 13 bit | 
| Resolution Multiturn | Programmable max. 16 bit, pre-programmed 12 bit | 
| Multiturn Technology | Self powered magnetic pulse counter (no battery, no gear) | 
| Accuracy (INL) | ±0.0878° (≤ 12 bit) | 
| Sense Signal (Default) | Clockwise shaft movement (front view on shaft) | 
| Code | Programmable Gray or Binary, preprogrammed Binary | 
| Incremental Pulses | Programmable Pulses up to 16384, Default = 1024 | 
| Environmental Specifications | |
| Protection Class (Shaft) | IP65 | 
| Protection Class (Housing) | IP66/IP67 | 
| Operating Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) | 
| Humidity | 98% RH, no condensation | 
| Mechanical Data | |
| Housing Material | Steel | 
| Housing Coating | Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance) | 
| Flange Type | Clamp, ø 58 mm (L) | 
| Flange Material | Aluminum | 
| Shaft Type | Solid, Single Flat, Length = 20 mm | 
| Shaft Diameter | ø 10 mm (0.39″) | 
| Shaft Material | Stainless Steel V2A (1.4305, 303) | 
| Max. Shaft Load | Axial 40 N, Radial 110 N | 
| Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N) | 
| Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] | 
| Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) | 
| Max. Permissible Mechanical Speed | ≤ 12000 1/min | 
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) | 
| Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) | 
| Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) | 
| Length | 52,7 mm (2.07″) | 
| Weight | 285 g (0.63 lb) | 
| Electrical Connection | |
| Connection Orientation | Radial | 
| Connector | M23, Male, 12 pin, CCW / left | 
| Product Life Cycle | |
| Product Life Cycle | Established | 
| Approval | CE + cULus listed, Industrial Control Equipment | 
| 
 | |
| Connection Plan | |
| SIGNAL | PIN NUMBER | 
| Power Supply | 11 | 
| GND | 12 | 
| Data+ | 3 | 
| Data- | 4 | 
| Clock+ | 2 | 
| Clock- | 1 | 
| DIR | 8 | 
| Preset | 9 | 
| A | 5 | 
| B | 7 | 
| Z | 6 | 
| /Error | 10 | 
| Shielding | Housing | 

